CHEMICALGUYS - 139mm Hex-Logic Pad (5,5 Inch)

Hex-logic pads are engineered and developed for today's pickiest detailing professionals. Engineered, developed and tested to specific requirements of our OEM clients these pads utilize the best foams from around the world.

The Hexagon is not new to science it's just new to detailing. Rather then try to reinvent some catchy gimmick, Chemical Guys invests in technology that through the years has simply been unbeatable and improves on it. Hex-Logic pads are designed to hold product and distribute it evenly over the surface of the pad delivering a superior even finish that is hard to achieve with any other pad.

The Hex-Logic Chemical Guys Pads are meant to work on flat or rounded/angled surfaces. The unique construction of the pads makes them extremely easy to maneuver while retailing the correct amount of product evenly distributed through the pad, Hex-Logic Pads keep product in the groves while you start and as the pad is spun and rubbed against the surface the polish with travel thought the hex-groves into the pad evenly delivering a superior accurate finish, while keeping the surface constantly lubricated to reduce friction and marring.

The unique Hex Laser Cute Surface of the pad enables Hex-Logic pads to conform to the shape of the surface delivering maximum surface contact. Unique Hexagon construction form perfectly to a vehicles many curves while he unique pad construction reduces unnecessary heat.

Hex-logic pads are open allowing maximum air to flow through the foam. Chemical compounds and polishes require the right amount of air flow through the foam. Open cell foam is ideal is achieving the best results from your chemicals.

Hex Logic Professional Pads have durable, long lasting backings on them for easy wash, maintenance and reuse. Developed for professional use Hex-Logic pads will not separate from the foam like traditional pads. The unique glue and heat transfer bonding system assures long durable use time after time.

Yellow Heavy Cutting Pad
	Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches in conjunction with a polishing compound. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange pad and a fine polish and then a white pad to refine the paint until it is smooth. Use With: Diamond Cut 1.0 - Heavy Cut Compound CGC-3 Heavy Cut Compound Cutting compounds with heavy duty grit 500-1000 grit count
Orange Medium-Heavy Cutting Pad
	This firm, high density foam is ideal for scratch and defect removal. The orange foam offers the correction of a typical compounding pad whilst at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze. It's an all around pad that will work on most light to moderate imperfections. Use With: Diamond Cut 1.0 - Heavy Cut Compound (for lighter cut then yellow pad) Diamond Cut 1.5 - Medium Cut Compound Scratch & Swirl B-Gone CGC-2 Medium Cut Compound Cutting compounds with heavy duty grit 1000-1500 grit count
Green Heavy Polishing Pad
	This pad is tough enough to remove swirls and scuffs while at the same time producing a high gloss swirl free finish. This foam is also ideal for applying one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application. Use With: Diamond Cut 1.5 - Medium Cut Compound Scratch & Swirl B-Gone All-In-1 Polish CGC-2 Medium Cut Compound Cutting compounds with heavy duty grit 1000-1500 grit count Pro Polish (As Cutting Product - when used with green pad)
White Light-Medium Polishing Pad
	Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners. It is the most well used pad as it is ideal for application of pre wax cleansers as well as many finishing polishes such as Pro-Polish or FP-Final Polish. Use With: Diamond Cut 2.0 - Light Cut Compound Scratch & Swirl B-Gone CGC-1 Light Cut Compound Pro Polish (As Finishing Product) Cutting compounds with heavy duty grit 1500-2000 grit count
Blue Soft Polishing/Finishing Pads - Glaze & Cleaner Foam Pad
	Unique Composition complements all glazes and light surface cleaners perfectly delivering a super fine finish for use with ultra fine polishes life FP or any glaze. Use With: FP final polish EZ Creme Glaze Cutting compounds with heavy duty grit 1500-2000 grit count
Black Finishing Foam
	Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes. Use With: Wet Mirror Finish EZ Creme Glaze Revive Glaze Extreme Depth Liquid Carnauba

Diameter:	139mm
Quantity:	1 Pcs.